Industrial Equipments

Approx. Rs 18,000 / PieceGet Latest Price

Product Details:

Discount Available on this Price Point...
All Sizes Available.
The pneumatic grease pump is an essential equipment for mechanization of oil or grease injection equipment, is driven by compressed air and has built-in automatic reciprocating device to automatically reciprocate up and down. To pressurize the high pressure and carry out the oil or grease to feed the lubricating oil.

Approx. Rs 3,375 / PieceGet Latest Price

Product Details:

Discount Available on this Price Point..
All Sizes Available..
Drill press vise holds fast with its forged steel jaws to reduce vibration when drilling. The vise is built to be fastened right onto your drill press table with convenient built-in bolt-down slots.

Approx. Rs 299 / PieceGet Latest Price

Product Details:

Size- 3/4lb, 1lb.
Discount Available on this Price Point.
A claw hammer is a tool primarily used for driving nails into, or pulling nails from, some other object. Generally, a claw hammer is associated with woodworking but is not limited to use with wood products.

Approx. Rs 1,650 / PieceGet Latest Price

Product Details:

Discount Available on this Price Point.....
All Sizes Available..Jash large size Stacked C.I. Angle Plates provide a practical means for clamping and holding work in the vertical position for layout, tooling and machining. Angle plates are also used as a vertical reference for inspection.

Approx. Rs 4,200 / PieceGet Latest Price

Product Details:

Discount Available on this Price Point.
All Sizes Available..

A pipe vice is a plumbing tool used to hold pipe or tubing securely so that it can be cut or threaded. Pipe vices are also useful for pipe welding. In a manufacturing environment, a pipe vice is a critical piece of apparatus in the assembly of pipeline components

Approx. Rs 24,200 / PieceGet Latest Price

Product Details:

Discount Available on this Price Point.
All Sizes Available. Providing a very good quality of products.

Approx. Rs 2,400 / PieceGet Latest Price

Product Details:

Discount Available on this Price Point ..

A crimping tool is a device that is used to make cold weld joints between wires and a connector through deforming one or both of them to hold the other. A special connector is used to join metals together. ... An instance of crimping is to affixing a connector to the end of a wire.

Approx. Rs 5,190 / PieceGet Latest Price

Product Details:

Discount Available on this Price Point...
All Sizes Available..

a chuck with jaws that open and close independently. Independent chucks can be adjusted to accommodate irregularly shaped workpieces. They are used to clamp odd items square in shape, dog chucks normally have 4 screws operated independently..

Approx. Rs 14,790 / PieceGet Latest Price

Product Details:

Discount Available on this Price Point..
All Sizes Available..
The main use for a milling vice is to clamp objects in order to be milled. The vice is designed to hold the workpiece firmly between its jaws so that it stays completely still when the cutter rotates through the material.

Product Price :Get Latest Price

Product Details:

Discount Available on this Price Point...
All Sizes Available..


– Turn on the air source, insert the quick-change connector into the air inlet of the device. At this time, the cylinder piston of the device and the pump piston reciprocate up and down, the muffler port is exhausted, and the device starts to work normally.18-Oct-2020

Approx. Rs 5,000 / PieceGet Latest Price

Product Details:

Fix Rate.

MS strip is a steel strapping used for heavy-duty packaging. It provides the best banding to seal the packages that carry very heavy loads.

Approx. Rs 8,873 / PieceGet Latest Price

Product Details:

Discount Available on this Price Point...

All Sizes Available..

A self-centering chuck, also known as a scroll chuck, uses dogs (usually called jaws), interconnected via a scroll gear (scroll plate), to hold onto a tool or workpiece.

Approx. Rs 13,055 / PicesGet Latest Price

Product Details:

Discount Available on this Price Point.
Use the pressure feed container (1000 to 2000 mL) for medium-size coating jobs using a pressure feed spray gun. The paint pressure tank (10 to 80 L) and diaphragm paint pump are ideal for line coating in factories and continuous coating work using automatic coating equipment, robots, etc.

Approx. Rs 1,930 / PieceGet Latest Price

Product Details:

Discount Available on this Price Point

• Attach the airbrush gun to compressor hose. ...
• Drop makeup into airbrush cup. ...
• Turn on compressor and bring airbrush gun up to 4-6 inches from face.
• Begin makeup application. ...
• Begin airbrush makeup application. ...
• Apply airbrush makeup in small circular motions.

Product Price :Get Latest Price

Product Details:

size- 12mm 19mm.  
Discount Available on this Price Point..

Approx. Rs 7,758 / PieceGet Latest Price

Product Details:

Discount Available on this Price Point.
All Sizes Available....
A self-centering chuck, also known as a scroll chuck, uses dogs (usually called jaws), interconnected via a scroll gear (scroll plate), to hold onto a tool or workpiece.

Approx. Rs 135 / PieceGet Latest Price

Product Details:

Size- 1liter, 5liter, 10liter, 20liter, Other Sizes Avaliable.

Oil production is measured and reported in barrels, or “bbl.” Production rates are typically reported in terms of barrels per day, which may be abbreviated in several different ways, including bpd, b/d and bbl/d.

Approx. Rs 53 / PieceGet Latest Price

Product Details:

Size- 50ml, To 1liter.
Aluminium is a silvery-white, lightweight metal. It is soft and malleable. Aluminium is used in a huge variety of products including cans, foils, kitchen utensils, window frames, beer kegs and aeroplane parts.

Approx. Rs 3,310 / PieceGet Latest Price

Product Details:

Discount Available on this Price Point.

Oxy-fuel cutting is a thermal cutting process that uses oxygen and fuel gas (such as acetylene, propane, MAPP, propylene and natural gas) to cut through materials.

Approx. Rs 99 / PieceGet Latest Price

Product Details:

Discount Available on this Price Point...
All Sizes Available..… nut and are known as spring calipers, while those on the left are an illustration of firm-joint calipers, which are held in place by friction at the joint. Outside calipers measure thicknesses and outside diameters of objects; inside calipers measure hole diameters and distances between surfaces.

Approx. Rs 1,455 / PieceGet Latest Price

Product Details:


Discount Available on this Price Point.

• A Quick Safety Note. ...
• Loosen Rusty Nuts and Bolts. ...
• Soldering Copper Pipes. ...
• Brazing Metals Together. ...
• Bending Steel. ...
• Shrink Tubing for Wires. ...
• Remove Labels From Glass Bottles. ...
• Pyrography.

Approx. Rs 2,400 / PieceGet Latest Price

Product Details:

Discount Available on this Price Point...
All Sizes Available.

Pipe Center Blunt is extensively used for grinding and turning pipes and tubes, which cannot be held by ordinary Revolving Centers. This product is widely acknowledged and demanded among the masses.

Approx. Rs 79 / KgGet Latest Price

Product Details:

Size- 12mm, 19mm

They are used in various industries for different purposes and widely appreciated for its appropriate thickness, dimensions and sizes. These strips are strong, wear & tear- resistant, and are relied upon for packing transportation goods. They are durable and available at market leading prices.

Approx. Rs 788 / PIECEGet Latest Price

Product Details:

Discount Available on this Price Point..
All Sizes Available........
Drill chucks are devices used to hold a drill or other cutting tools on a spindle. They are available in keyed, keyless or hybrid systems, allowing for quick changes of a drill bit. Key Styles: Keyed chucks are engineered to either loosen or tighten the hold on a tool by using a key.

Approx. Rs 268 / PieceGet Latest Price

Product Details:

Discount Available on this Price Point..
All Sizes Available.

A C-clamp, or G-clamp, is a type of clamp device typically used to hold a wood or metal workpiece, and often used in, but are not limited to, carpentry and welding.

Approx. Rs 1,250 / PieceGet Latest Price

Product Details:

Discount Available on this Price Point.   
All Sizes Available..

A chain pipe wrench turns pipe in either direction and can be used like a ratchet wrench. The handle can be loosened, shifted, and turned again without taking the chain from around pipe. It can be used on round, square, or irregular shapes without crushing the object

Approx. Rs 385 / PieceGet Latest Price

Product Details:

Discount Available on this Price Point.
All Sizes Available..The pipe wrench is an adjustable wrench used for turning soft iron pipes and fittings with a rounded surface

Approx. Rs 587 / PieceGet Latest Price

Product Details:

Discount Available on this Price Point.
An adjustable wrench, also called an adjustable spanner or an adjustable crescent is a tool, which can be used to loosen or tighten a nut or bolt. It has a "jaw" (the part where the nut or bolt fits), which is of adjustable size [source: Websters].13-Jun-2011

Approx. Rs 165 / PieceGet Latest Price

Product Details:

Size- 3/4", 1", 1.1/4", 1.1/2", 2"
Discount Available on this Price Point. providing a very good quality of products.